Acura TL Spec-D Cold-Air Intake system delivers maximum performance gains and HorsePower through the all aluminum, mandrel bent tubing, tuned in both length and diameter. All systems are finished in a Zirconia based powder coating to reduce heat penetration which can not be achieved with other finishes. The Spec-D Cold-Air Induction system has been known to provide most applications with a substantial Horsepower increase throughout the bandwith.

The Cold-Air Intake system a complete replacement of your existing intake. The Cold-Air Intake system extends your intake tube into the bumper allowing cooler, less dense air to the engine. The result of the Cold-Air Intake being in the lower portion of the bumper is more consistent cooler air flow, the more Cold-Air you get to the engine, more horsepower is gained. This in turn creates more power, better throttle response and in some cases increased gas mileage. Installation of the Cold-Air Intake System is generally quite simple, with minimal cutting required, if at all. You begin by removing the existing air intake tube and filter. You may have to remove the mass air flow spacer and bracket to remove both halves of the factory unit. Once you remove the factory installed air box and filter, you can start to install the cold-air Intake extension. Start at the throttle body and work your way down. You will need to remove the front bumper cover so you can put the new filter and tube extension inside of it. The Cold-Air Intake filter and tube will recess inside the bumper, drawing cool air from the speed of your Acura TL.The Cold-Air Intake is easier to maintain and adds styling to your engine bay. The Cold-Air Intake Filter is cleanable as well as the tubes being easily removed for maintience and cleaning. All in all, installing a Cold-Air Intake System is a smart move for a great price.